CS706 Previous Mid Term Paper (Subjective & Objective)

CS706 MID TERM PAPER Part 1
Q.1. What are requirement? Write their types in detail (10)
Q.2 . What are quality attributes? Write their type in detail (10)
q.3. What is abstraction? Write its level and types? (10)
Q.4. What is software design concept? Write in context of abstraction (10)
Q.5. Rework in ETVX framework (10)
Q.6. Define moderator. Code of conduct for moderator (10)

CS706 MID TERM PAPER Part 2

Q#1: What are requirement problems? What is the Impact of wrong Requirements?
Q#2: Guidelines of Good Design Model. 
Q#3: Quality Design Model? Explain Abstract.
Q#4: Defect Eliminate Strategies.
Q#5: Testing and non-testing Methods.
Q#6: What are different roles of review?

CS706 MID TERM PAPER Part 3

1)    Write about requirement problems? What are the impacts of wrong requirements?
2) Give a brief guideline of good design model?
3) Explain quality design model? Explain its abstraction?
4) Write data recording n reports steps of inspection process? various roles n responsibilities regarding inspection. Explain its ETVX fully.
5) Explain reader and recorder during inspection?
6) What is software defect? Write the adverse effects of soft defects ? explain categories of defects?

CS706 MID TERM PAPER Part 4

CS706 Paper All question of 10 marks 
Q1 - ETVX Model of Inspection Meeting
Q2 - Inspection VS Testing
Q3 - Requirement Gathering In SDLC
Q4 - Techniques to develop design document
Q5 - Quality, Quality Laggards
Q6 - Abstraction, Information Hiding

CS706 MID TERM PAPER Part 5

Q.1 what is inspection meeting? Explain ETVX model for Inspection Meeting?

Q.2 Project Management approach for achieving high quality software? What is SQA group? What are SQA group & their activities?

Q.3 Explain ETVX model for Inspection?

Q.4 Explain Different kinds of Software requirements?

Q.5Explain guidelines for good, Writing Requirements?

Q.6 Explain Guidelines for Good Design Model?

Q, 7 Explain review roles and their responsibilities?

  

CS706 MID TERM PAPER Part 6

The questions that I remember are as follows.

1. ABC is Software Company, which develops software. You are appointed as a software quality assurance engineer for software.  When you used the software you found number of defects.

What strategies you can suggest to the software company to avoid the defects?

2. Suppose that you are working in a software company, which developed high quality software. You are working as requirement engineer in the company. Your company got the project of development of railway ticketing. You received the requirement document, which contains following requirements.

The Government has issued a special credit card for the use to the customers. The user first has to select their destination then they input the card number and their National Identity Card (NIC) number. The railway ticket is issued to the user after deducting the amount from credit card. First user has to press start button then a menu will be displayed on the system. This menu contains the list of destinations along with the message, which inform user to select destination. When user selects the destination the system ask for the credit card number. The system checks the validity of the credit card and asks to enter NIC number. When all this information validated the ticket is issued to the user.

Consider the above set of requirements for ticket issuing system. You have to find incomplete and ambiguous requirements in above scenario.

3. Tell four types of software defects

4. How customer satisfaction can be measured?

5 (a). Explain ETVX model

   (b) Apply ETVX model for rework

6. The _____requirement document_______ is a formal document used to communicate the requirements to customer, engineers and managers.

7. ETVX stands for ______Entry Task Validation/Verification Exit.

8. Willful insertion of errors into software deliverable prior to a review, inspection or testing activity is called _____defect seeding­­­­­­­­­­­_____

9. A _____software defect______ is an error flaw, mistake, failure in software that prevents it from behaving as intended.

10. ___Coupling____ is a measure of interconnection among modules in software structure.

11. ____Temporal Cohesion_____ occurs when components that are activated at a single time or time span are put together.

12. SQA group reports to project management. (T/F)

CS706 MID TERM PAPER Part 7

1-    What is Software quality? Write its Synonyms and antonyms? wirte key factors of quality.
2- Write 5 fundamental defects types in design
3- what is Rework? Write on it according to ETVX
4- Write review list names? And explain them briefly 
5- Which types of defects can found in coding? write them briefly
6- Write code of conduct of Moderator briefly

2-    each question was of 10 marks with time of 20 minutes no MCQS

1. Y2K bug belongs to which of the following defects?

A) Errors of Commission  b)errors of omission D) Capacity and speed D)Clarity

2. An SRS is ______if and only if requirement contained are easy to locate

 a) Modifiable b) Organized c) Valid d) Understandable by customer e) valid e)Design independent

3._______Cohesion occurs when components that are activated at single time span put together

a) Co-incidental B) temporal c) procedural e) communicational

4. _____cohesion occurs when elements in a component for single control

a) Co-incidental B) temporal c) procedural e) communicational

5. Which of the following defects are found in coding?

  (a)      Errors of Commission  b)Errors of omission D) Errors of Capacity and speed D)errors of Clarity f) all of the above

6.______________ is responsible for managing efficient and effective inspection meeting

a) Author b) moderator c) reviewed D) leader

7. Following data is gathered during ______

How much effort is expanded?

How many proposals for improvement

a) Rework b) analysis meeting c) inspection processing d) inspection meeting e)review

8. The ___ has two roles during all inspection meeting?

A) Author    B) Moderator       c) reviewer      d) inspection      e) observer

9. What percent software organize perform activity quality assurance?

A) 10% b) 5% c) 50% d) 20% e) 15%

10. SRS is _________ if it does not imply specific software architecture?

a) Modifiable b) Organized c) Valid d) Understandable by customer e) valid e) Design independent